End of Life and NRND Products

AFS Air Flow Sensors

EOL - End of Life

• Realized high and long-term stability
• Small platinum thin film thermal sensor and an even temperature differential operating circuit ensure a quick response
• Built-in temperature compensation circuit assures correct values regardless of air temperature
• Products have no rotating mechanism and are resistant to vibration

BLR Ceramic, Custom Resistors

• Power rating: 1W, 2W, 15W
• Resistance range: 8m ~ 50mΩ
• Tolerance: ±5%, ±10%

BR BGA Resistor Network

EOL - End of Life

• Virtually eliminates channel capacitance, a primary cause of reduced system performacne
• Erases routing design of DDR SDRAM termination
• Number of terminals: 27 & 36

CCP Fast Blow Chip Fuses

EOL - End of Life

• Immediate cut-off of excessive heat
• No generation of heat
• UL94V0 epoxy case
• Current rating: 0.75 ~ 5A
• Sizes available: 1206, 1210

CN Isolated Chip Networks-Concave Termination, Square Corners

EOL - End of Life

• Resistance range: 1 ~ 1MΩ
• Tolerance: +1% ~ +5%
• Size: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x2 elements

CN-RT Isolated Chip Networks-Concave Termination, Square Corners (Anti-Sulfur)

EOL - End of Life

• Excellents anti-sulfur characterisitcs
• Passes ASTM-809 anti-sulfuring testing

CNB Bussed Concave Termination, Square Corner Resistor Array

EOL - End of Life

• Resistance range: 1 ~ 470KΩ
• Tolerance: +5%
• Sizes available: 4 or 8 elements included in one array

CND Bussed Concave & Convex Termination, Square Corner

EOL - End of Life

• Resistance range: 22 ~ 100kΩ
• Tolerance: +5%
• Sizes: 0603, 0805, 1260 x8 elements

CNZ Zero Ohm Jumper

EOL - End of Life

• Current rating@70°C (per elements): 0.5A & 1A
• Sizes: 0402, 0603, 0805, 1206 x2, x4, x8 elements

CN_K, CN_N Isolated Chip Networks-Convex Termination, Square Corners

EOL - End of Life

• Resistance range: 1 ~ 1MΩ
• Tolerances: +1% ~ +5%
• Sizes: 0402, 0603 x2, x4, 0602 x8 elements

CN_KRT Isolated Chip Networks-Convex Termination, Square Corners (Anti-Sulfur)

EOL - End of Life

• Excellents anti-sulfur characterisitcs
• Passes ASTM-809 anti-sulfuring testing

CN___A Isolated Chip Network, Flat Termination, Square Corners

EOL - End of Life

• Resistance range: 10 ~ 1MΩ
• Tolerances: +1% ~ +5%
• Sizes: 0603 x8 elements

CR Network Resistors

EOL - End of Life

• Metal Glaze (Ru0₂) provide lifetime stability
• Number of pins: 5 ~ 14
• Resistance range: 10 ~ 1MΩ
• Capacitance range: 10pF ~ 0.1μF

HVDQ24 High Voltage Divider- Precision Type Resistors

Recommended Replacement for New Design: HVDP08

• Max. resistance value 11.5MΩ
• Max. working voltage 1000V
• Max. resistance Ratio 1000:1
• Relative tolerance: 0.1%
• TCR tracking: 10ppm/°C
• TCR: ±25, ±50ppm/°C
• Absolute resistance tolerance: ±0.1% ~ ±1%

KL73 Thin Film Inductor

EOL - End of Life

• Nominal Resistance: 0.56nH ~ 100nH
• DC Resistance max (W): 0.10 ~ 14000
• Inductance tolerance: +0.1nH ~ +5%

KQ/KQT High Q Inductors

• Ideal for low loss, high output power consumption
• Q factor min.: 16 ~ 65
• Inductance range: 1 ~ 10000nH
• Tolerance: ±0.1n ~ ±20%

KQC High Current Inductors

• Low DC resistance and high allowable DC current
• Low profile style of 0.027 inches (0.7mm) typical
• Nominal inductance range: 1.2 ~ 27nH
• Tolerance: ±0.1 ~ ±5%
• Sizes: 0402, 0603

KT11835 Transponder Coil (Rx)

NRND - Not Recommended for New Design

• Nominal Inductance: 2.4mH ~ 12mH
• L,Q Measuring Frequency: 125kHz
• Upload Qaulity Factor Min: 32 ~ 45

LA73 Thick Film Linear

• Twenty-five specifiable temperature characteristics
• Sizes: 0603, 0805, 1206
• Thermal dissipation constant (mW°C): 7.6, 8.2, 9.0
• Max. working voltage: 25V, 50V

LF Radial Metal Film Leaded Resistor

• Power rating: 0.125W ~ 0.5W
• Resistance range: 1 ~ 1M
• TCR: +50ppm/°C, +100ppm/°C, +200ppm/°C

LKS Power chip inductors shielded type

• Small size and low-profile
• Low DC Resistance and larger Rated Current
• Suitable for reflow soldering

LPC Choke coil Inductors

• Small size allows for high mounting density
• Large DC current capacity with low DC resistance
• Polarity identification available

LPC4045, LPC4235, LPC4545 Power Chip Inductor

• Low DC resistance and high allowable current due to proprietary construction & wiring technology
• DC current max.: 0.07 ~ 3.66A
• Inductance range: 0.82 ~ 2200μH
• Tolerance: ±10% ~ ±20%
• Sizes: 4045, 4235, 4545

LR72A, LR72B, LR72C Custom Low Resistance Current Sense Resistors

• Flexible leads allow for thermal expansion
• Unique open-center shapes for cooler operation
• Resistance values: 2 ~ 8mΩ

MO Metal Oxide Power Type Leaded Resistor

• Flameproof silicone coating equvalent to UL94V0
• Power rating: 0.5W ~ 3W
• Resistance range: 0.2 ~ 150k

MRP Precision Metal Film SIP Network Resistors

EOL - End of Life

• Custom design network
• Ultra-precision performance for precision analog circuits
• Absolute TCR: ±25, ±50ppm/°C
• Tracking TCR: 2, 5, 10
• Power rating: (mW): element-100, package-200

MRS Plate Shaped High Precision Metal Film Resistors

EOL - End of Life

• Ultra precision TCR up to ±2.5ppm/°C
• Low tolerance: ±0.01%, ~ ±0.5%
• Wide resistance range: 10 ~ 1MΩ

NPR Surface Mount Molded Current Sense

EOL - End of Life

• Power rating: 2512-1W, 4527-2W
• Resistance values: 105m ~ 22MΩ
• Tolerance: ±0.5%, ±1%, ±5%
• TCR: ±100ppm/°C

NT73 Temperature Compensation Thick Film Resistors

• Twelve standard resistance values
• Sizes: 0603, 0805, 1206
• B constant @25°C/75°C: 3200K ~ 4100K
• B constant tolerance: ±3%, ±5%, ±10% 

NV73 Metal Oxide Varistors

• Multilayer structure with high surge current
• Protector against static electricity, switching and incoming surges
• Varistor Voltage: 6.8 ~ 120V
• Sizes available: 0201 ~ 2220
• Max. Energy: 0.001J ~ 14J

NV73DS Load Dump Surge Metal Oxide Varistors

• Symmetrical non-linearity V-I characteristics absorb positive and negative surge
• Meets JASO load dump surge test requirements
• Max. load dump surge energy: 63 ~ 70J
• Operating temperature: up to +125°C
• Sizes available: 2420
• AEC-Q200 Tested

NVD Metal Oxide Varistor Disc Type

• Flame retardant Coating (UL94V-0)
• Diameter: 05, 07, 10, 14, 20
• Varistor Voltage: 18V ~ 1800V

NVF Metal Oxide Varistor (Nonflammable Coated)

• Flame retardant Silicone (UL94V-0) outer coating
• Max. Energy (J): 27.5 ~ 67.0
• Varistor Voltage: 220V ~ 680V

PSB Large Current Sensing, Ultra Low Resistance

NRND - Not Recommended for New Design

• Resistance range: 0.2, 0.75, 1mΩ
• Power rating: 6W, 12.5W
• TCR: ±75, ±100ppm/°C
• Tolerance: ±1%

PSE Large Current Sensing, Ultra Low Resistance

NRND - Not Recommended for New Design

• Resistance range: 0.5, 1, 1.5, 2mΩ
• Power rating: 3W, 5W
• TCR: ±150ppm/°C
• Tolerance: ±1%, ±5%

PSI Large Current Sensing, Ultra Low Resistance

• Resistance range: 3, 4mΩ
• Power rating: 3W
• TCR: ±50ppm/°C
• Tolerance: ±1%

RD412A/2D Fixed Carbon Film MELF Resistors

• Metal plate terminals
• Meets or exceeds IEC 60115-8, EIA RC-2131A
• TCR: +350 ~ -1300ppm/°C
• Power Rating: 0.25W

RF26 Coat insulated Fusing Resistors (L type)

• Quick fusing protects circuit from normal condition
• Resistance range: 0.1 ~ 1K
• Power rating: 3W ~ 10W

RK92 High Voltage SIP Resistors

EOL - End of Life

• High resistance resistor for high voltage circuits
• Flame retardant coats corresponding to UL94V-0 are used
• Thick film resistors (Ru02) ensure high stability in life and change in aging
• Resistance range: 1M ~ 1GΩ

RK92D Thick Film Resistors for High Voltage

EOL - End of Life

• High-precision high voltage divider for high voltage circuits
• Thin SIP shape suitable for space saving mounting
• Higher relative accuracy of resistance value is possible with one package
• Power rating: 0.5/0.2W
• Resistance range: 750k/6.25k, 2M/10k, 13M/26k, 33M/33kΩ

RK92L High Voltage SIP Discharge Resistors

EOL - End of Life

• Excellent overload capability and high stability life and aging even in insulating oil
• Thin SIP shape suitable for space saving mounting
• Custom type three-terminal product is available
• Power rating: 4W
• Resistance range: 1.2M, 3M, 4M, 5M, 8M, 12M, 16MΩ

RKC, RKH, RKL Thick Film SIP Resistors Network

EOL - End of Life

• Various type of standard circuits in different sizes and power (seated height 0.20", 0.26", 0.42")
• Higher temperature soldering of the leads prevents terminals from loosening during board assembly
• Number of resistors: 3 ~ 16
• Tolerance: ±1%, ±2%, ±5%
• Resistance range: 22 ~ 2.2MΩ

RM412D, RN412A/2D Fixed Metal Film MELF Resistors

• Higher stability in short and long term tests
• TCR: ±25 ~ ±350ppm/°C
• Power Rating: 0.125W, 0.2W, 0.25W, 0.4W, 0.5W, 1W
• Resistance range: 0.22 ~ 5. 11MΩ

RM412H, RN412E/2H Fixed Metal Film MELF

NRND - Not Recommended for New Design

• Higher stability in short and long term tests
• TCR: ±25 ~ ±350ppm/°C
• Power Rating: 0.125W, 0.2W, 0.25W, 0.4W, 0.5W, 1W
• Resistance range: 0.22 ~ 5. 11MΩ

RN73 Precision Metal Film Resistors

• High precision tolerance: +0.5% ~ +1%
• High performance TCR: +5ppm/°C ~ +100ppm/°C
• Resistance range: 10 ~ 1M

SA Surge Absorber

• Surge Current Capacity: 500A
• DC Spark Over Voltge: 200V ~ 700V
• DC Spark Over Voltage Tolerance: +20%, +30%

SDT310VASP Small Type Platinum Thin Film Thermal Sensors

NRND - Not Recommended for New Design

• Small heater element type with operating temperature range: -55°C ~ +600°C
• Small as quarter volume convenience type 3.2 second thermal time constant
• Excellent heat resistance
• Applies axial lead type suitable to use as heater element
• TCR: +3850±25ppm/°C

SF Insulated Super Miniature Precision Mental Film Resistor

NRND - Not Recommended for New Design

• Resistance range: 100 ~ 5.11M
• Power rating: 0.125W ~ 0.5W
• TCR: +5ppm/°C & +10ppm/°C

SHDR Microwave Thin Film

• Excellent frequency characteristics up to 15HGz: Reflection coefficient-not more than 15dB
• Resistance range: 22 ~ 1K
• Tolerance: +5%

SL1, SL2 Thick Film Current Sensing

• Power rating: 2512-1W, 4527-2W
• Resistance values: 105m ~ 22MΩ
• Tolerance: ±0.5%, ±1%, ±5%
• TCR: ±100ppm/°C

SLP Current Sensing Chip Resistors

• Power rating: 1W, 2W
• TCR: ±50 ppm/°C
• Resistance range: 10 ~ 100mΩ
• Tolerance: ±0.5%, ±1%

TLR3A Current Sense Resistors, Reduced Size

NRND - Not Recommended For New Design. Alternative: TLR3AW

• Power rating: 2512-1W
• Resistance range: 1m - 4mΩ
• TCR: ±150ppm/°C, ±200ppm/°C
• Tolerance: ±1%

TPR Anti-Surge Fusing Resistors

• Quickly fuses to overload
• Terminal temperature under rated load: +125°C and less
• Max. Open-circuit Voltage: 320V a.c.

WF Thermal Fuse Built-in Resistors

• Current rating: 2A, 10A
• Voltage rating: AC 250V
• Power rating: 5W, 7W, 10W

XR73B/XR73H/XR73Z Embedded Substrate Flat Chip Resistors

• Interlayer embedding in the multilayer substrates applicable from the height of 0.13 to 0.14mm
• Cu via hole connection is applicable
• Resistance range: 1 ~ 10MΩ, zero ohm offered
• Sizes available: 0201, 0402